One of the Top Parkville Lawn Care Services Outlines 6 Steps For Sharpening Your Mower Blades

As a leading lawn care company in Parkville, our team at By the Blade knows that maintaining sharp mower blades is crucial for achieving a clean and precise cut while mowing your lawn. Dull blades not only result in an uneven lawn but also put unnecessary stress on the mower. In this guide, we’ll walk you through the step-by-step process of sharpening your mower blades, ensuring your lawn looks pristine every time.

Step 1: One of the Top Parkville Lawn Care Services Stresses, “Safety First”

Before you begin, prioritize safety by wearing protective gloves and safety glasses. Additionally, make sure the engine is turned off and the spark plug wire is disconnected to prevent accidental starts. Always work on a level surface and secure the mower to prevent any accidental movement.

Step 2: Our Lawn Care Company in Parkville Recommends Removing the Blade

To access the blades, first, tilt the mower on its side, ensuring the air filter and carburetor are facing up. Locate the blade attachment bolt or nut, which holds the blade in place. Using a socket wrench, loosen and remove the bolt or nut, carefully taking note of the blade’s orientation to ensure correct reassembly later.

Step 3: The Best Parkville Lawn Care Services Always Clean the Blades First

With the blade removed, it’s time to clean off any accumulated dirt, grass clippings, or rust. Using a wire brush or a scraper, gently remove any debris from both sides of the blade. If there is rust, apply a rust-removing solution and scrub with a brush until clean. Once the blade is free of debris and rust, rinse it thoroughly with water and allow it to dry completely.

Step 4: An Explanation from One of the Top Parkville Lawn Care Services on Sharpening the Blade

To sharpen the blade, you have two options: manual sharpening or using a bench grinder. For manual sharpening, secure the blade in a vise and use a sharpening file to follow the original cutting-edge angle. Stroke the file in a forward motion along the cutting edge, maintaining the original angle until you achieve a sharp edge. Repeat the process on the opposite side.

If you’re using a bench grinder, ensure the grinder is stable and the blade is securely held. Slowly move the blade across the grinder, maintaining a consistent angle. Parkville lawn care services want you to avoid excessive pressure to prevent overheating the blade. Regularly dip the blade in water to cool it down.

Step 5: A Good Lawn Care Company in Parkville Will Balance the Blade

A balanced blade is crucial for smooth operation and to prevent excessive vibrations. Use a blade balancer or a nail and hang the center hole of the blade on it. If one side of the blade dips, it indicates imbalance. To correct this, remove a small amount of metal from the heavier side until the blade is balanced horizontally. Repeat the process until the blade remains level.

Step 6: Tips from Experts on Parkville Lawn Care Services on Reinstalling the Blade

After the blade is sharpened and balanced, it’s time to reinstall it. Position the blade correctly, ensuring it aligns with the mower deck’s designated slots. Replace the blade attachment bolt or nut and tighten it securely using a socket wrench. Double-check the blade’s orientation to ensure it is correctly installed.

Sharpening your mower blades is a vital maintenance task that guarantees a well-manicured lawn. By following these simple steps, you can ensure your blades are sharp, balanced, and ready for action. Remember to prioritize safety, take your time, and perform this maintenance task at least once or twice a mowing season to keep your lawn looking its best.

By The Blade: One of the Top Lawn Care Services in Parkville

Whether you need new sod installed or year-round maintenance for your yard, By the Blade has you covered. As one of the best lawn services in Parkville, we take great pride in making sure our clients have a majestic yard that they can be proud of. Not to mention, we also customize and design swimming pools. In fact, many of our past clients consider us one of the best pool design companies in Parkville.

If you need more information about our Parkville lawn care services, and how we can rejuvenate your lawn, please contact By The Blade in Parkville, MO today.

Give us a call!

816-400-4144